Chunky Planter Build Process
Page 11 of 17
Posted 16th October 2021
The next job was to cut the grooves for the weld mesh to sit in. I've got this 8 mm shank spiral up-cut bit and that seemed ideal for the job:
I fitted the big fence (from my larger router) onto my small router to help give a consistent cut.
First up was the rebates, which are cut in two of the long lengths for the big planter...
... and two small lengths for the small planter:
Then I just had to cut the slots in the short pieces that form the ends and middle of the planters. I think I was getting tired at this point: my first attempt was in completely the wrong place:
I haven't got any spare wood, but I think there are plenty of places where this can be hidden on the inside of the planter! I'll probably cut a bit of wood and glue it in to protect it a bit from water ingress.
This is where it should have been:
Page 11 of 17
This website is free and ad-free, but costs me money to run. If you'd like to support this site, please consider making a small donation or sending me a message to let me know what you liked or found useful.