Home
- What's New: home page and list of updates to this site.
- Site Index: a list of all of the page on this site.

Vim Scripts
- TagHighlight: highlighting of typedefs, #defines, enumerated names etc in Vim.
- EasyColour: colour schemes made easy!
- Bandit Colour Scheme: a colour scheme for Vim.

Metalwork
- Introduction: an introduction to the metalworking pages on my website.
- My Workshop: some information about my metalworking workshop.
- Mini-Lathe: improvements and tooling for my mini-lathe.
- SX3 Milling Machine: improvements and tooling for my milling machine.
- Harrison M250: improvements and tooling for my Harrison M250.
- Grinder: improvements and tooling for my bench grinder.
- Bandsaw: improvements and tooling for my bandsaw.
- Welding: projects related to welding.
- Miscellaneous: metalworking-related stuff that doesn't fit elsewhere.
- Metalwork Calculators: a selection of on-line calculators related to metalworking.
- Metalwork Data: some useful data for metalworking projects.

Woodwork
- Introduction: an introduction to the woodworking pages on my website.
- My Workshop: some information about my woodworking workshop.
- Hand Tools: hand tools and accessories that I've made.
- Power Tools & Accessories: power tool accessories that I've made.
- Benches: benches that I've made.
- Furniture: furniture that I've made.
- Boxes: boxes that I've made.
- Outdoor Projects: outdoor projects I've done.
- Other Projects: woodwork projects that don't fit into the other categories.
- Woodwork Calculators: a selection of on-line calculators related to woodwork.

3D Printing

Software
- ARPCalc: a powerful reverse polish calculator.
- Digraph: a simple tool to make symbol entry easier when typing.

Useful Tools and Notes
- Google Maps to GPX: a tool to create route plans for your GPS with Google Maps.
- GEMF Format: a format for efficiently storing map tiles for use off-line on smart phones with FAT32 or similar file systems.
- Ebay Seller Blacklist: a browser plug-in to allow you to blacklist bad ebay sellers.

Chunky Planter Build Process

Page 13 of 17

25/10/2021

I found myself with a bit of time again this evening, so I put this 10 mm rounding over bit in the router table and got going with rounding over the visible edges of all the pieces.

Here's one piece with the edges rounded over:

I needed to round over all sides of the bit that sticks out, but only the outside faces of the long edges. The exceptions were the top pieces, which got rounded over on the inside top corner as well.

This is one of the top pieces after rounding over. Not a very interesting post today, but I'm glad to have all that rounding over done. There are about 40 pieces that make up the two planters, so there were a lot of edges to round over!

Page Navigation:

This website is free, but costs me money to run. If you'd like to support this site, please consider making a small donation or sending me a message to let me know what you liked or found useful.