Nodus Draw: Dimensions and centrelines

Dimensions show the size of things on the drawing, and stay attached to what they measure: change the object and the dimension changes with it.

Drawing a dimension

Choose the dimension tool (D). Click what to measure from, click what to measure to, then move to where the dimension should go and click.

What you click decides what is measured:

Click Then Measures
A point (a node, a corner) Another point The distance between them: horizontally or vertically if the dimension is placed above or beside them, along the line between them if placed across it
A point A line The distance square to the line
A line A parallel line The distance between them
A line A line that crosses it The angle between them: the one where you place it
A line Empty space The line's length
A circle or arc Empty space Its diameter (⌀) or, for an arc, its radius (r)
A circle A point, line or circle The distance from the circle's edge

To measure from a circle's centre instead of its edge, click its centre point itself (the pointer snaps to it) rather than the circle.

A click on a node uses that node; on a straight line, the line; elsewhere whatever the pointer snaps to (hold Shift to always use the snap point; hold Alt for no snapping at all). Escape abandons the dimension.

Ends on a node, a line or a circle stay attached: moving or reshaping the object moves the dimension with it. Measuring an object and then making it bigger makes the number bigger. A dimension whose line or circle is deleted, or stops being straight, parallel or round, lets go of it and is marked with a dashed red box until you move one of its ends.

Moving and changing it

  • Drag the dimension with the pick tool to move its line nearer to or further from what it measures; it still measures the same thing.
  • Drag its text to slide it along the line, from the middle to just inside or just outside either end (and the line across with it). An angle's text moves round its arc; a diameter's or radius's text goes where you drop it, its leader following.
  • Move an end with the shape tool: select the dimension, drag an end to another node.

The Dimension tab of the Properties docker (shown first when a dimension is selected) has:

  • Measures: horizontally, vertically or along the line (between two points);
  • Decimal places, Leave off trailing zeros and Show the unit (mm);
  • the Arrowheads and Arrowhead size;
  • Show extension lines: dashed lines from the measured points to the dimension line, with their own colour, width and line style below;
  • Text: upright on the page (turned by the Text angle) or along the line;
  • for circles, whether it shows the radius or the diameter.

Tools › Options chooses whether new dimensions' text is upright or along the line. New dimension text is 3.5 mm high.

A dimension is a group of its lines and text. Its lines' width, colour and dashes and its text's font can be changed as any object's, and they are kept as the dimension changes. A palette colour goes where it belongs: an outline colour (right-click) on the lines, a fill colour (left-click) on the text. Convert to curves (Ctrl+Q) makes it a plain group of lines and text, no longer attached to anything.

Centre marks and centrelines

The centreline tool marks the centres of things:

  • Click a circle or arc for a centre mark: a small cross at its centre, with lines out across the circle.
  • Click a line, then a line parallel to it or a point, for a dashed centreline midway between them, running a little past both ends.

Like dimensions, they stay attached to what they were made on, and are marked in red if it no longer fits (lines no longer parallel, a circle gone). A centre mark can be turned and enlarged about its centre; a centreline can be stretched along its length.

Next: Pages, layers and objects


This website is free and ad-free, but costs me money to run. If you'd like to support this site, please consider making a small donation or sending me a message to let me know what you liked or found useful.