Nodus Draw: Editing shapes

The shape tool (N or F10; the second tool in the toolbox) edits the nodes of lines and curves, and the corners and arcs of rectangles, ellipses and polygons. Double-clicking a shape with the pick tool switches to the shape tool on it.

It works on the selected objects: switching to it keeps the selection, and every selected curve shows its nodes. Click another object to edit that one instead, or Shift+click it to add it. Objects inside groups can be edited too.

Rectangles, ellipses and polygons

These stay as shapes, so the shape tool changes them as a whole:

  • Rectangle: drag a corner node to round all four corners. The corner snaps, so dragging it to the next grid point rounds the corners by exactly one grid square. With the pick tool, the property bar has each corner's radius, and a padlock to keep them the same. A rectangle stretched more one way than the other (100 × 100 mm made 100 × 150 mm, say) stretches its rounded corners too, so they are no longer quarter circles; Reset scale (the "1:1" button on the property bar, or Object › Reset scale to 100 % (keeping the size)) keeps its size and makes them round again.
  • Ellipse: drag its node round it to make an arc (with the pointer outside the ellipse) or a pie (inside). Ctrl keeps to 15° steps.
  • Polygon: it has a node at each corner and in the middle of each side, and every side changes together. Drag a corner node to resize and turn it, or a side node to make it a star.

For anything else, Object › Convert to curves (Ctrl+Q) turns the shape into a curve whose nodes can be edited one by one.

Nodes

Nodes are small squares on the curve; selected ones are filled. The two ends of an open line are drawn as small triangles pointing along it, so you can see which end is its start (which matters for arrowheads).

  • Selecting: click a node; Shift+click adds or removes one; drag a rectangle across empty space to select the nodes inside it. Ctrl+A selects them all and Escape deselects them.
  • Moving: drag a node (Ctrl: only across or only up and down), or nudge the selected nodes with the arrow keys. They snap as drawing does.
  • Handles: the selected nodes show the handles that shape the segments either side of them. Drag a handle to change the curve (Ctrl: 15° steps).
  • Bending: drag a segment to bend it. A straight segment becomes a curve.
  • Adding and deleting: double-click a segment to add a node there, and double-click a node to delete it. Delete deletes the selected nodes.
  • Sliding along the curve: Shift+drag a node to slide it along the curve as it was, or slide the insertion point (the dot a click on a segment leaves) along it before adding a node. Both snap to points along the curve, such as where it crosses another line, so a node can be added exactly on a crossing.

The property bar has buttons for the rest (hover over one for its name and key):

Button Key What it does
Add node Insert Adds a node at the insertion point
Delete nodes Delete Deletes the selected nodes
Join two nodes J Joins two end nodes into one, halfway between them
Join where ends meet Shift+J Joins every pair of ends of the selected curves that meet (within 0.1 mm), and closes any that meet themselves
Break curve B Splits the curve at the selected nodes, or at the point clicked on a segment
Extend curve to close Joins two end nodes with a straight line
Convert to line / to curve Makes the segment ending at each selected node straight, or a curve with handles
Cusp, smooth, symmetrical C, S, M A cusp is a sharp corner; a smooth node's handles stay in line; a symmetrical node's are also the same length
Reverse direction Swaps the curve's start and end
Close curve Joins its ends
Extract subpath Makes the piece the selected nodes are on a separate object
Align nodes Puts the selected nodes on one horizontal or vertical line
Reduce nodes Removes nodes the curve does not need; its smoothness (0 to 100) sets how far the curve may move to lose more of them

Shift+J works with any tool: it joins the ends of the selected curves that meet, which is handy after drawing a shape in pieces and combining them (Ctrl+L).

Breaking a curve keeps both pieces in one object. Object › Break apart (Ctrl+K) makes each piece an object of its own.

Corners

The property bar's Rounded, Scalloped and Chamfered buttons, with the corner radius beside them, shape corners:

  • on a selected rectangle or polygon, every corner, staying so as it is resized, turned or made into a star (0 makes them sharp again);
  • on a curve, the selected nodes that are corners: a rounded corner (an arc touching both sides), a scallop (a bite out of the corner) or a chamfer (cut off straight). Rounded also rounds a node where a curve meets a line or another curve.

Changing the radius straight afterwards remakes the corners just made at the new radius, so you can try radii until it looks right.

Smart trim

The smart trim tool (S; the scissors) removes the piece of a line between the places where it crosses other lines and shapes, or itself, or where another line ends on it. The piece a click would remove is shown in red, dashed, under the pointer (in blue when the line itself is red or nearly red, so that it stands out). A line that crosses nothing is removed whole. Trimming a closed shape leaves an open line; rectangles, ellipses and polygons become curves when they are trimmed.

For example, to draw a slot: draw two circles and two lines touching both (the tangent line tool makes this easy), then trim away the inner halves of the circles. Object › Combine (Ctrl+L) and Shift+J then join the four pieces into one outline.

Next: Outlines and fills


This website is free and ad-free, but costs me money to run. If you'd like to support this site, please consider making a small donation or sending me a message to let me know what you liked or found useful.