Nodus Draw: Tracing images

Tools › Trace Image… turns a picture, such as a logo, an icon or a scanned diagram, into filled curves that you can edit, recolour and scale without it going blocky. Each colour in the picture becomes one object.

  • In a drawing, select a picture (and nothing else) and choose Tools › Trace Image…, or right-click the picture and choose Trace Image…. The traced curves go in as a group just in front of the picture, which stays where it is unless you ask for it to be deleted.
  • In an image tab, Tools › Trace Image… traces the whole image as it shows (its visible layers) and opens the result as a new drawing, the size of the image.

The Trace Image window

The preview shows the picture and the traced result side by side (Before and after), the result alone (Traced), or the traced outlines over a faded copy of the picture (Outlines over the image). Scroll over the preview to zoom in, and drag to move round; Fit shows all of it again. Below the preview are the number of objects, nodes and colours the result has.

Every change traces the picture again, so you can try the settings until the result looks right:

  • Detail: more keeps smaller specks and colours that are closer together; less gives fewer, simpler shapes.
  • Smoothing: more lets the curves stray further from the pixels, for smoother outlines with fewer nodes.
  • Corner smoothness: more rounds off corners; at 0, sharp corners stay sharp.
  • Number of colours: Automatic, or at most the number you choose.
  • Colours: the colours found, with how much of the picture each covers. Tick two or more and click Merge to make them one colour, or Delete to leave a colour out (its areas go to the nearest colour left). Reset Colours goes back to the colours found.
  • Background: the colour all round the picture's edge is left out to start with (Remove (found automatically)). Keep traces it too. Remove a colour (or Pick) lets you click the background in the preview. Only the background round the edge is removed: the same colour inside the picture, such as white inside a logo, stays.
  • Find lines of even width: on (to start with), bands of the same width all along, such as the wires of a diagram, the rings round circles and the sides of boxes, become lines with an outline that wide (with round or square ends and round or mitred corners, as in the picture), which you can edit as lines. A ring round an area of another colour becomes that area filled, with the ring as its outline. Shapes whose width varies, such as brush strokes, and most lettering stay filled shapes.
  • Join dashes into dashed lines: on (to start with), short lines one after another along a straight line, with even gaps, become one dashed line, which you can edit as one.
  • Recognise text: off to start with. On, the text in the picture is read and becomes text you can edit, in its colour, at about its size, in the bundled font nearest it in width (bold if it is). It downloads the text reader (about 7 MB) the first time, then keeps it. Text it cannot read with confidence, and text at an angle, stays traced as shapes.
  • One object for each colour: on, each colour is one object (with all its areas); off, each separate area is an object of its own.
  • Remove overlap: off (to start with), each colour is drawn over the ones below it, so no thin gaps show between neighbouring colours; on, each object is cut out where others are, so that none overlaps another.
  • Delete the original image: delete the picture once it is traced.

Reset goes back to the settings Nodus Draw starts with. The settings you use are kept for next time.

Pictures are traced at up to 4 million pixels (2000 × 2000); larger ones are traced at that size, which is quicker and makes no visible difference to the result.

Good to know

  • Anti-aliasing (the soft, in-between shades along the edges in most pictures) is not traced as colours of its own: each edge goes where the shades put it, between the pixels.
  • The traced shapes have no outline, and lines' outlines are their width. If you add an outline, or scale the traced picture, outlines scale with the objects, so a traced picture made bigger keeps its look.
  • Text recognition reads English; other languages' letters may be misread, or left traced.
  • Photographs trace into very many objects; tracing is best for pictures with a few flat colours.

Next: Files


This website is free and ad-free, but costs me money to run. If you'd like to support this site, please consider making a small donation or sending me a message to let me know what you liked or found useful.