Nodus Draw: Drawing
Choose a tool in the toolbox down the left of the window, or press its key. A new object is drawn in the default style (see Outlines and fills) on the active layer, and is left selected with the tool still in hand, ready to draw another.
Letter keys choose a tool only when nothing is selected, because with a selection some letters act on it. After drawing something, press Escape to deselect it before pressing another tool's letter. Escape also abandons whatever is being drawn; with nothing selected or being drawn, it switches to the pick tool.
While you draw, the property bar shows the pointer's position and the size so far, and the status bar says what would be made if you let go or clicked now, such as "Length 50.00 mm, angle 53.1°" for a line or "Diameter 20.00 mm" for a circle. The points you place snap to the grid, guidelines and other objects (see Precision).
Lines and curves
| Tool | Key | How to use it |
|---|---|---|
| 2-point line | L | Press, drag and release to draw one straight line. Starting on the end of a selected line carries that line on, so several segments drawn one after another make one line. |
| Polyline | P | Click each point in turn; double-click, Enter or Escape finishes. Clicking the first point again closes the shape. Backspace takes back the last point. Starting on the end of a selected line carries it on. |
| Bézier | B | Click for a sharp corner (a cusp); press and drag for a smooth node, dragging out its handles. Double-click, Enter or Escape finishes; clicking the first node closes the curve. Backspace takes back the last node. |
| Tangent line | Click a circle or arc: a line that touches it follows the pointer, sliding round the circle. Click where the line should end. Snapped onto another circle's tangent point, it touches both. Clicking the end of an arc starts the line there, carrying on in the arc's direction. | |
| Three-point arc | Press at the start of the arc, drag to its end and release, then move the pointer to bend the arc through it, and click. | |
| Centre arc | A | Press at the centre, drag out to where the arc starts (setting its radius) and release, then move round the centre and click where it ends. |
| Sine wave | Shift+S | Press where one period of the wave starts, drag to where it ends and release, then move the pointer to set the height of the first peak, and click. Hold Shift for a cosine (starting at a peak). For a longer wave, duplicate it and join the ends (see Selecting and arranging). |
Holding Ctrl keeps lines, and Bézier handles, to 15° steps.
The cursor changes when it is over the end of a selected line that a line tool would carry on from.
Shapes
| Tool | Key | How to use it |
|---|---|---|
| Rectangle | R or F6 | Drag from one corner to the other. Ctrl makes a square; Shift draws from the centre. |
| Ellipse | E or F7 | Drag from one corner of its box to the other. Ctrl makes a circle; Shift draws from the centre. |
| Circle from its centre | C or Shift+C | Press at the centre and drag out to the edge. |
| Polygon | Drag a box for it (Ctrl: a regular polygon; Shift: from the centre). It has a corner at the top. The number of sides (5 to start with) is on the property bar: for the selected polygon, or for new ones when nothing is selected. |
With an ellipse selected, the property bar turns it into a pie or an arc, with its start and end angles (clockwise from the right) and a button to swap to the other part of the ellipse.
Rectangles, ellipses and polygons stay as shapes, so they keep their nature as they are resized: a rectangle's corners can be rounded, an ellipse made into an arc, a polygon into a star, all with the shape tool (see Editing shapes, which also says how to keep rounded corners round when a rectangle is stretched). Object › Convert to curves (Ctrl+Q) turns one into an ordinary curve whose nodes can be edited one by one.
Other tools
- Text (T or F8): click to type a line of text, drag a frame for a paragraph, or click just inside a shape's outline to put text in the shape. See Text.
- Connector: drag from one object to another for a line that stays attached to both as they move. See Connectors and flowcharts.
- Dimension (D): click two points or lines, then where the measurement should go. It stays attached to what it measures. See Dimensions and centrelines.
- Centreline: click a circle for a centre mark, or two parallel lines for a centreline between them.
- Smart trim (S): click a line to cut out the piece between the places where it crosses other lines. See Editing shapes.
- Colour eyedropper: click anything to pick up the colour seen there, then Shift+click an object to give it that colour (its outline if you click the outline, otherwise its fill or its text). The cursor's tube shows the colour picked up.
- Zoom: click to zoom in, Shift+click or right-click to zoom out, or drag a rectangle to zoom to it.
This website is free and ad-free, but costs me money to run. If you'd like to support this site, please consider making a small donation or sending me a message to let me know what you liked or found useful.