Nodus Draw: Selecting and arranging

The pick tool (the arrow at the top of the toolbox) selects, moves, resizes and turns objects. Tap Space to switch to it from any tool and back again.

Selecting

  • Click an object to select it; Shift+click adds an object to the selection, or takes it out.
  • Drag across empty space to select the objects wholly inside the rectangle (a marquee).
  • Ctrl+click selects an object inside a group (Ctrl+Shift+click adds one). A plain click selects the whole group.
  • Alt+click selects the object behind the one selected; click again for the one behind that, and so on.
  • Ctrl+A selects everything; Escape deselects. Double-clicking the pick tool's button also selects everything.

An unfilled shape is selected by clicking its outline. With nothing selected, the property bar has two buttons to change that: Treat all objects as filled, so that clicking anywhere inside a shape selects it, and Treat objects with an outline as unfilled, so that a shape with an outline is selected only by its outline even when it is filled (handy for picking out lines drawn over filled areas).

The Selection Filter docker says what kinds of object a click, a marquee or Ctrl+A may select: lines and curves, rectangles, ellipses, polygons, text, dimensions, images and so on, and whether locked objects can be. While anything is filtered out the status bar says "Selection filters are active". The filter is not kept: Nodus Draw always starts with everything selectable apart from locked objects.

Moving

Drag a selected object to move it; hold Ctrl to move it only across or only up and down. You can grab the selection by one of its points (a node, the middle of a side, a corner or the centre of its box, or the centre of the whole selection): hover over it to see a marker, and that point then snaps to the grid or to other objects as you move. A symbol picked up by the end of one of its pins puts that pin on the grid.

While moving, R turns the selection a quarter turn clockwise (Shift+R anticlockwise) about the point you are holding it by, and X and Y mirror it.

The arrow keys nudge the selection by the nudge distance (0.1 mm unless you change it on the property bar with nothing selected); Shift+arrow moves it ten times as far and Ctrl+arrow half as far.

Escape during a drag puts things back as they were.

Resizing, turning and mirroring

A selection has eight handles round it. The corner handles keep its proportions; the side handles stretch it one way. Shift resizes about the centre; Ctrl resizes in whole steps of 100 %, so dragging past the opposite side mirrors it exactly.

Click the selection again for the turning handles: the curved arrows at the corners turn it, the straight arrows on the sides skew it, and the circle in the middle is the centre it turns about, which you can drag anywhere (Nodus Draw remembers where you put it for that selection). Ctrl keeps turning and skewing to 15° steps. Selecting something else brings back the resizing handles.

From the keyboard (or the Object menu): R turns the selection 90° clockwise, X mirrors it left to right and Y top to bottom.

Exact sizes and positions

With objects selected, the property bar shows:

  • a reference point (the 3 × 3 grid of squares): which point of the selection the position refers to;
  • X and Y, the position, and W and H, the size, in millimetres. The button beside them makes the size include the outline's width;
  • the scale across and down, in per cent, with a padlock to keep them in proportion;
  • the angle it has been turned by, and buttons to mirror it.

Type a value and press Enter to apply it. For a single object the scale and angle are its own: a rectangle drawn 100 mm wide and then stretched to 150 mm shows 150 %. Reset scale (the "1:1" button, or Object › Reset scale to 100 % (keeping the size)) makes it 100 % at the size it is now.

The Transform docker

The Transform docker (Object menu, or Alt+F7 to Alt+F10) does the same as the property bar with more control: Position, Rotate, Scale and Mirror, Size and Skew tabs, each with an Apply button and a Copies field. With copies, each copy is transformed from the one before, so rotating by 30° with 3 copies makes a fan at 30°, 60° and 90°.

Circular patterns

The Transform docker's Rotate tab makes patterns round a point, such as the slots of a motor or the teeth of a gear:

  • Centre: the selection's box (a point of it, with an offset), typed coordinates, or where it was moved on the drawing (the turning centre you last dragged with the pick tool). Choose on the drawing lets you pick the point with the pointer, snapped as drawing is.
  • Copies by: an angle and a number of copies; a total angle and a number of objects (360° and 8 objects puts them 45° apart); or a total angle and the spacing between them. The line below the fields says how far apart they will be and how many copies there will be.

Duplicating

Ctrl+D (Edit › Duplicate) makes a copy of the selection a little way off (5 mm right and 5 mm up to start with; change it on the property bar with nothing selected) and selects the copy. Press it again for another copy as far on again.

Duplicating is smart: move the copy to where you want it (drag it, nudge it, or type a position) and the next Ctrl+D repeats that move. For example, draw a sine wave, duplicate it, drag the copy's start onto the end of the original, then press Ctrl+D a few more times for a long wave; Object › Combine (Ctrl+L) and Shift+J then join the pieces into one line.

Ctrl+C, Ctrl+X and Ctrl+V copy, cut and paste, also between drawings. Pasted objects follow the pointer, held by their centre and snapping as they move, until a click puts them down (Escape abandons them; R, X and Y turn and mirror them). With Paste follows the pointer turned off in Tools › Options, objects copied from the same page are pasted where they were, and others in the middle of the window.

Groups and stacking order

  • Ctrl+G groups the selected objects so that they move and resize together; Ctrl+U ungroups them. Click inside a group with Ctrl held to select one object in it.
  • Objects later in a layer are drawn in front of earlier ones. Object › Order changes that: Shift+PgUp / Shift+PgDn to the front or back of the layer, Ctrl+PgUp / Ctrl+PgDn forward or back one, Ctrl+Home / Ctrl+End to the front or back of the page, and In Front Of… or Behind… another object (choose it, then click that object).

The Objects docker lists the layers and the objects on them, where you can also select, rename, hide, lock and reorder objects by dragging them (see Pages, layers and objects).

Lining up

The Align and Distribute docker (and Object › Align and Distribute) lines up the selected objects by their left, centre or right, or top, middle or bottom, and spaces them out evenly. They can be lined up with the last object selected (which stays put), the edge or centre of the page, the grid, or a point you type.

Keys for the commonest ones: C lines up their centres one above another, E side by side, and Shift+L, Shift+R, Shift+T and Shift+B line up their left, right, top or bottom edges. The last object selected stays where it is. Shift+P centres the selection on the page.

Combining shapes

  • Object › Combine (Ctrl+L) makes the selected objects into one curve, with the style of the last one selected. Break apart (Ctrl+K) splits a curve into its separate pieces.
  • Object › Shaping (and the Shaping docker) combines closed shapes by area:

    • Weld: one shape covering everything the selected shapes cover.
    • Subtract: the target shape with the others' area cut away.
    • Intersect: a new shape of just the area they all share.

    The target is the last object selected (or, after a marquee, the backmost), and the result takes its style.

  • Object › Convert outline to object (Ctrl+Shift+Q) turns each selected shape's outline into a filled shape of its own, the outline's colour, with its corners, line ends, dashes and arrowheads.

The right-click menu

Right-click the drawing for a menu of what can be done to the selection: group, cut, copy, paste, convert to curves, combine, order, align and so on. Right-clicking an object that is not selected selects it first.

Next: Precision


This website is free and ad-free, but costs me money to run. If you'd like to support this site, please consider making a small donation or sending me a message to let me know what you liked or found useful.